diff options
Diffstat (limited to 'ip/ip_fp_inv_sim/synopsys/vcsmx/vcsmx_setup.sh')
| -rwxr-xr-x | ip/ip_fp_inv_sim/synopsys/vcsmx/vcsmx_setup.sh | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/ip/ip_fp_inv_sim/synopsys/vcsmx/vcsmx_setup.sh b/ip/ip_fp_inv_sim/synopsys/vcsmx/vcsmx_setup.sh new file mode 100755 index 0000000..f644e44 --- /dev/null +++ b/ip/ip_fp_inv_sim/synopsys/vcsmx/vcsmx_setup.sh @@ -0,0 +1,195 @@ + +# (C) 2001-2023 Altera Corporation. All rights reserved. +# Your use of Altera Corporation's design tools, logic functions and +# other software and tools, and its AMPP partner logic functions, and +# any output files any of the foregoing (including device programming +# or simulation files), and any associated documentation or information +# are expressly subject to the terms and conditions of the Altera +# Program License Subscription Agreement, Altera MegaCore Function +# License Agreement, or other applicable license agreement, including, +# without limitation, that your use is for the sole purpose of +# programming logic devices manufactured by Altera and sold by Altera +# or its authorized distributors. Please refer to the applicable +# agreement for further details. + +# ACDS 20.1 720 linux 2023.10.31.13:44:11 + +# ---------------------------------------- +# vcsmx - auto-generated simulation script + +# ---------------------------------------- +# This script provides commands to simulate the following IP detected in +# your Quartus project: +# ip_fp_inv +# +# Altera recommends that you source this Quartus-generated IP simulation +# script from your own customized top-level script, and avoid editing this +# generated script. +# +# To write a top-level shell script that compiles Altera simulation libraries +# and the Quartus-generated IP in your project, along with your design and +# testbench files, copy the text from the TOP-LEVEL TEMPLATE section below +# into a new file, e.g. named "vcsmx_sim.sh", and modify text as directed. +# +# You can also modify the simulation flow to suit your needs. Set the +# following variables to 1 to disable their corresponding processes: +# - SKIP_FILE_COPY: skip copying ROM/RAM initialization files +# - SKIP_DEV_COM: skip compiling the Quartus EDA simulation library +# - SKIP_COM: skip compiling Quartus-generated IP simulation files +# - SKIP_ELAB and SKIP_SIM: skip elaboration and simulation +# +# ---------------------------------------- +# # TOP-LEVEL TEMPLATE - BEGIN +# # +# # QSYS_SIMDIR is used in the Quartus-generated IP simulation script to +# # construct paths to the files required to simulate the IP in your Quartus +# # project. By default, the IP script assumes that you are launching the +# # simulator from the IP script location. If launching from another +# # location, set QSYS_SIMDIR to the output directory you specified when you +# # generated the IP script, relative to the directory from which you launch +# # the simulator. In this case, you must also copy the generated library +# # setup "synopsys_sim.setup" into the location from which you launch the +# # simulator, or incorporate into any existing library setup. +# # +# # Run Quartus-generated IP simulation script once to compile Quartus EDA +# # simulation libraries and Quartus-generated IP simulation files, and copy +# # any ROM/RAM initialization files to the simulation directory. +# # +# # - If necessary, specify any compilation options: +# # USER_DEFINED_COMPILE_OPTIONS +# # USER_DEFINED_VHDL_COMPILE_OPTIONS applied to vhdl compiler +# # USER_DEFINED_VERILOG_COMPILE_OPTIONS applied to verilog compiler +# # +# source <script generation output directory>/synopsys/vcsmx/vcsmx_setup.sh \ +# SKIP_ELAB=1 \ +# SKIP_SIM=1 \ +# USER_DEFINED_COMPILE_OPTIONS=<compilation options for your design> \ +# USER_DEFINED_VHDL_COMPILE_OPTIONS=<VHDL compilation options for your design> \ +# USER_DEFINED_VERILOG_COMPILE_OPTIONS=<Verilog compilation options for your design> \ +# QSYS_SIMDIR=<script generation output directory> +# # +# # Compile all design files and testbench files, including the top level. +# # (These are all the files required for simulation other than the files +# # compiled by the IP script) +# # +# vlogan <compilation options> <design and testbench files> +# # +# # TOP_LEVEL_NAME is used in this script to set the top-level simulation or +# # testbench module/entity name. +# # +# # Run the IP script again to elaborate and simulate the top level: +# # - Specify TOP_LEVEL_NAME and USER_DEFINED_ELAB_OPTIONS. +# # - Override the default USER_DEFINED_SIM_OPTIONS. For example, to run +# # until $finish(), set to an empty string: USER_DEFINED_SIM_OPTIONS="". +# # +# source <script generation output directory>/synopsys/vcsmx/vcsmx_setup.sh \ +# SKIP_FILE_COPY=1 \ +# SKIP_DEV_COM=1 \ +# SKIP_COM=1 \ +# TOP_LEVEL_NAME="'-top <simulation top>'" \ +# QSYS_SIMDIR=<script generation output directory> \ +# USER_DEFINED_ELAB_OPTIONS=<elaboration options for your design> \ +# USER_DEFINED_SIM_OPTIONS=<simulation options for your design> +# # +# # TOP-LEVEL TEMPLATE - END +# ---------------------------------------- +# +# IP SIMULATION SCRIPT +# ---------------------------------------- +# If ip_fp_inv is one of several IP cores in your +# Quartus project, you can generate a simulation script +# suitable for inclusion in your top-level simulation +# script by running the following command line: +# +# ip-setup-simulation --quartus-project=<quartus project> +# +# ip-setup-simulation will discover the Altera IP +# within the Quartus project, and generate a unified +# script which supports all the Altera IP within the design. +# ---------------------------------------- +# ACDS 20.1 720 linux 2023.10.31.13:44:11 +# ---------------------------------------- +# initialize variables +TOP_LEVEL_NAME="ip_fp_inv" +QSYS_SIMDIR="./../../" +QUARTUS_INSTALL_DIR="/nix/store/q54w47mfmcj9ag8kxwqvyi0snainbhjw-quartus-prime-lite-unwrapped-20.1.1.720/quartus/" +SKIP_FILE_COPY=0 +SKIP_DEV_COM=0 +SKIP_COM=0 +SKIP_ELAB=0 +SKIP_SIM=0 +USER_DEFINED_ELAB_OPTIONS="" +USER_DEFINED_SIM_OPTIONS="+vcs+finish+100" + +# ---------------------------------------- +# overwrite variables - DO NOT MODIFY! +# This block evaluates each command line argument, typically used for +# overwriting variables. An example usage: +# sh <simulator>_setup.sh SKIP_SIM=1 +for expression in "$@"; do + eval $expression + if [ $? -ne 0 ]; then + echo "Error: This command line argument, \"$expression\", is/has an invalid expression." >&2 + exit $? + fi +done + +# ---------------------------------------- +# initialize simulation properties - DO NOT MODIFY! +ELAB_OPTIONS="" +SIM_OPTIONS="" +if [[ `vcs -platform` != *"amd64"* ]]; then + : +else + : +fi + +# ---------------------------------------- +# create compilation libraries +mkdir -p ./libraries/work/ +mkdir -p ./libraries/altera_ver/ +mkdir -p ./libraries/lpm_ver/ +mkdir -p ./libraries/sgate_ver/ +mkdir -p ./libraries/altera_mf_ver/ +mkdir -p ./libraries/altera_lnsim_ver/ +mkdir -p ./libraries/cyclonev_ver/ +mkdir -p ./libraries/cyclonev_hssi_ver/ +mkdir -p ./libraries/cyclonev_pcie_hip_ver/ + +# ---------------------------------------- +# copy RAM/ROM files to simulation directory + +# ---------------------------------------- +# compile device library files +if [ $SKIP_DEV_COM -eq 0 ]; then + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_primitives.v" -work altera_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/220model.v" -work lpm_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/sgate.v" -work sgate_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_mf.v" -work altera_mf_ver + vlogan +v2k -sverilog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_lnsim.sv" -work altera_lnsim_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/synopsys/cyclonev_atoms_ncrypt.v" -work cyclonev_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/synopsys/cyclonev_hmi_atoms_ncrypt.v" -work cyclonev_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_atoms.v" -work cyclonev_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/synopsys/cyclonev_hssi_atoms_ncrypt.v" -work cyclonev_hssi_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_hssi_atoms.v" -work cyclonev_hssi_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/synopsys/cyclonev_pcie_hip_atoms_ncrypt.v" -work cyclonev_pcie_hip_ver + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_pcie_hip_atoms.v" -work cyclonev_pcie_hip_ver +fi + +# ---------------------------------------- +# compile design files in correct order +if [ $SKIP_COM -eq 0 ]; then + vlogan +v2k $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QSYS_SIMDIR/ip_fp_inv.vo" +fi + +# ---------------------------------------- +# elaborate top level design +if [ $SKIP_ELAB -eq 0 ]; then + vcs -lca -t ps $ELAB_OPTIONS $USER_DEFINED_ELAB_OPTIONS $TOP_LEVEL_NAME +fi + +# ---------------------------------------- +# simulate +if [ $SKIP_SIM -eq 0 ]; then + ./simv $SIM_OPTIONS $USER_DEFINED_SIM_OPTIONS +fi |