diff options
Diffstat (limited to 'ip/ip_fp_fix_sim/mentor/msim_setup.tcl')
| -rw-r--r-- | ip/ip_fp_fix_sim/mentor/msim_setup.tcl | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/ip/ip_fp_fix_sim/mentor/msim_setup.tcl b/ip/ip_fp_fix_sim/mentor/msim_setup.tcl new file mode 100644 index 0000000..517c2b7 --- /dev/null +++ b/ip/ip_fp_fix_sim/mentor/msim_setup.tcl @@ -0,0 +1,272 @@ + +# (C) 2001-2023 Altera Corporation. All rights reserved. +# Your use of Altera Corporation's design tools, logic functions and +# other software and tools, and its AMPP partner logic functions, and +# any output files any of the foregoing (including device programming +# or simulation files), and any associated documentation or information +# are expressly subject to the terms and conditions of the Altera +# Program License Subscription Agreement, Altera MegaCore Function +# License Agreement, or other applicable license agreement, including, +# without limitation, that your use is for the sole purpose of +# programming logic devices manufactured by Altera and sold by Altera +# or its authorized distributors. Please refer to the applicable +# agreement for further details. + +# ---------------------------------------- +# Auto-generated simulation script msim_setup.tcl +# ---------------------------------------- +# This script provides commands to simulate the following IP detected in +# your Quartus project: +# ip_fp_fix +# +# Altera recommends that you source this Quartus-generated IP simulation +# script from your own customized top-level script, and avoid editing this +# generated script. +# +# To write a top-level script that compiles Altera simulation libraries and +# the Quartus-generated IP in your project, along with your design and +# testbench files, copy the text from the TOP-LEVEL TEMPLATE section below +# into a new file, e.g. named "mentor.do", and modify the text as directed. +# +# ---------------------------------------- +# # TOP-LEVEL TEMPLATE - BEGIN +# # +# # QSYS_SIMDIR is used in the Quartus-generated IP simulation script to +# # construct paths to the files required to simulate the IP in your Quartus +# # project. By default, the IP script assumes that you are launching the +# # simulator from the IP script location. If launching from another +# # location, set QSYS_SIMDIR to the output directory you specified when you +# # generated the IP script, relative to the directory from which you launch +# # the simulator. +# # +# set QSYS_SIMDIR <script generation output directory> +# # +# # Source the generated IP simulation script. +# source $QSYS_SIMDIR/mentor/msim_setup.tcl +# # +# # Set any compilation options you require (this is unusual). +# set USER_DEFINED_COMPILE_OPTIONS <compilation options> +# set USER_DEFINED_VHDL_COMPILE_OPTIONS <compilation options for VHDL> +# set USER_DEFINED_VERILOG_COMPILE_OPTIONS <compilation options for Verilog> +# # +# # Call command to compile the Quartus EDA simulation library. +# dev_com +# # +# # Call command to compile the Quartus-generated IP simulation files. +# com +# # +# # Add commands to compile all design files and testbench files, including +# # the top level. (These are all the files required for simulation other +# # than the files compiled by the Quartus-generated IP simulation script) +# # +# vlog <compilation options> <design and testbench files> +# # +# # Set the top-level simulation or testbench module/entity name, which is +# # used by the elab command to elaborate the top level. +# # +# set TOP_LEVEL_NAME <simulation top> +# # +# # Set any elaboration options you require. +# set USER_DEFINED_ELAB_OPTIONS <elaboration options> +# # +# # Call command to elaborate your design and testbench. +# elab +# # +# # Run the simulation. +# run -a +# # +# # Report success to the shell. +# exit -code 0 +# # +# # TOP-LEVEL TEMPLATE - END +# ---------------------------------------- +# +# IP SIMULATION SCRIPT +# ---------------------------------------- +# If ip_fp_fix is one of several IP cores in your +# Quartus project, you can generate a simulation script +# suitable for inclusion in your top-level simulation +# script by running the following command line: +# +# ip-setup-simulation --quartus-project=<quartus project> +# +# ip-setup-simulation will discover the Altera IP +# within the Quartus project, and generate a unified +# script which supports all the Altera IP within the design. +# ---------------------------------------- +# ACDS 20.1 720 linux 2023.11.22.08:27:52 + +# ---------------------------------------- +# Initialize variables +if ![info exists SYSTEM_INSTANCE_NAME] { + set SYSTEM_INSTANCE_NAME "" +} elseif { ![ string match "" $SYSTEM_INSTANCE_NAME ] } { + set SYSTEM_INSTANCE_NAME "/$SYSTEM_INSTANCE_NAME" +} + +if ![info exists TOP_LEVEL_NAME] { + set TOP_LEVEL_NAME "ip_fp_fix" +} + +if ![info exists QSYS_SIMDIR] { + set QSYS_SIMDIR "./../" +} + +if ![info exists QUARTUS_INSTALL_DIR] { + set QUARTUS_INSTALL_DIR "/nix/store/q54w47mfmcj9ag8kxwqvyi0snainbhjw-quartus-prime-lite-unwrapped-20.1.1.720/quartus/" +} + +if ![info exists USER_DEFINED_COMPILE_OPTIONS] { + set USER_DEFINED_COMPILE_OPTIONS "" +} +if ![info exists USER_DEFINED_VHDL_COMPILE_OPTIONS] { + set USER_DEFINED_VHDL_COMPILE_OPTIONS "" +} +if ![info exists USER_DEFINED_VERILOG_COMPILE_OPTIONS] { + set USER_DEFINED_VERILOG_COMPILE_OPTIONS "" +} +if ![info exists USER_DEFINED_ELAB_OPTIONS] { + set USER_DEFINED_ELAB_OPTIONS "" +} + +# ---------------------------------------- +# Initialize simulation properties - DO NOT MODIFY! +set ELAB_OPTIONS "" +set SIM_OPTIONS "" +if ![ string match "*-64 vsim*" [ vsim -version ] ] { +} else { +} + +# ---------------------------------------- +# Copy ROM/RAM files to simulation directory +alias file_copy { + echo "\[exec\] file_copy" +} + +# ---------------------------------------- +# Create compilation libraries +proc ensure_lib { lib } { if ![file isdirectory $lib] { vlib $lib } } +ensure_lib ./libraries/ +ensure_lib ./libraries/work/ +vmap work ./libraries/work/ +vmap work_lib ./libraries/work/ +if ![ string match "*ModelSim ALTERA*" [ vsim -version ] ] { + ensure_lib ./libraries/altera_ver/ + vmap altera_ver ./libraries/altera_ver/ + ensure_lib ./libraries/lpm_ver/ + vmap lpm_ver ./libraries/lpm_ver/ + ensure_lib ./libraries/sgate_ver/ + vmap sgate_ver ./libraries/sgate_ver/ + ensure_lib ./libraries/altera_mf_ver/ + vmap altera_mf_ver ./libraries/altera_mf_ver/ + ensure_lib ./libraries/altera_lnsim_ver/ + vmap altera_lnsim_ver ./libraries/altera_lnsim_ver/ + ensure_lib ./libraries/cyclonev_ver/ + vmap cyclonev_ver ./libraries/cyclonev_ver/ + ensure_lib ./libraries/cyclonev_hssi_ver/ + vmap cyclonev_hssi_ver ./libraries/cyclonev_hssi_ver/ + ensure_lib ./libraries/cyclonev_pcie_hip_ver/ + vmap cyclonev_pcie_hip_ver ./libraries/cyclonev_pcie_hip_ver/ +} + + +# ---------------------------------------- +# Compile device library files +alias dev_com { + echo "\[exec\] dev_com" + if ![ string match "*ModelSim ALTERA*" [ vsim -version ] ] { + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_primitives.v" -work altera_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/220model.v" -work lpm_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/sgate.v" -work sgate_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_mf.v" -work altera_mf_ver + eval vlog -sv $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_lnsim.sv" -work altera_lnsim_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/mentor/cyclonev_atoms_ncrypt.v" -work cyclonev_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/mentor/cyclonev_hmi_atoms_ncrypt.v" -work cyclonev_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_atoms.v" -work cyclonev_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/mentor/cyclonev_hssi_atoms_ncrypt.v" -work cyclonev_hssi_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_hssi_atoms.v" -work cyclonev_hssi_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/mentor/cyclonev_pcie_hip_atoms_ncrypt.v" -work cyclonev_pcie_hip_ver + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_pcie_hip_atoms.v" -work cyclonev_pcie_hip_ver + } +} + +# ---------------------------------------- +# Compile the design files in correct order +alias com { + echo "\[exec\] com" + eval vlog $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QSYS_SIMDIR/ip_fp_fix.vo" +} + +# ---------------------------------------- +# Elaborate top level design +alias elab { + echo "\[exec\] elab" + eval vsim -t ps $ELAB_OPTIONS $USER_DEFINED_ELAB_OPTIONS -L work -L work_lib -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver $TOP_LEVEL_NAME +} + +# ---------------------------------------- +# Elaborate the top level design with -voptargs=+acc option +alias elab_debug { + echo "\[exec\] elab_debug" + eval vsim -voptargs=+acc -t ps $ELAB_OPTIONS $USER_DEFINED_ELAB_OPTIONS -L work -L work_lib -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver $TOP_LEVEL_NAME +} + +# ---------------------------------------- +# Compile all the design files and elaborate the top level design +alias ld " + dev_com + com + elab +" + +# ---------------------------------------- +# Compile all the design files and elaborate the top level design with -voptargs=+acc +alias ld_debug " + dev_com + com + elab_debug +" + +# ---------------------------------------- +# Print out user commmand line aliases +alias h { + echo "List Of Command Line Aliases" + echo + echo "file_copy -- Copy ROM/RAM files to simulation directory" + echo + echo "dev_com -- Compile device library files" + echo + echo "com -- Compile the design files in correct order" + echo + echo "elab -- Elaborate top level design" + echo + echo "elab_debug -- Elaborate the top level design with -voptargs=+acc option" + echo + echo "ld -- Compile all the design files and elaborate the top level design" + echo + echo "ld_debug -- Compile all the design files and elaborate the top level design with -voptargs=+acc" + echo + echo + echo + echo "List Of Variables" + echo + echo "TOP_LEVEL_NAME -- Top level module name." + echo " For most designs, this should be overridden" + echo " to enable the elab/elab_debug aliases." + echo + echo "SYSTEM_INSTANCE_NAME -- Instantiated system module name inside top level module." + echo + echo "QSYS_SIMDIR -- Platform Designer base simulation directory." + echo + echo "QUARTUS_INSTALL_DIR -- Quartus installation directory." + echo + echo "USER_DEFINED_COMPILE_OPTIONS -- User-defined compile options, added to com/dev_com aliases." + echo + echo "USER_DEFINED_ELAB_OPTIONS -- User-defined elaboration options, added to elab/elab_debug aliases." + echo + echo "USER_DEFINED_VHDL_COMPILE_OPTIONS -- User-defined vhdl compile options, added to com/dev_com aliases." + echo + echo "USER_DEFINED_VERILOG_COMPILE_OPTIONS -- User-defined verilog compile options, added to com/dev_com aliases." +} +file_copy +h |