ip: add ip_fp_add, ip_fp_mul

1 files changed, 278 insertions, 0 deletions

diff --git a/ip/ip_fp_mul_sim/aldec/rivierapro_setup.tcl b/ip/ip_fp_mul_sim/aldec/rivierapro_setup.tcl
new file mode 100644
index 0000000..14027e6
--- /dev/null
+++ b/ip/ip_fp_mul_sim/aldec/rivierapro_setup.tcl
@@ -0,0 +1,278 @@
+
+# (C) 2001-2023 Altera Corporation. All rights reserved.
+# Your use of Altera Corporation's design tools, logic functions and 
+# other software and tools, and its AMPP partner logic functions, and 
+# any output files any of the foregoing (including device programming 
+# or simulation files), and any associated documentation or information 
+# are expressly subject to the terms and conditions of the Altera 
+# Program License Subscription Agreement, Altera MegaCore Function 
+# License Agreement, or other applicable license agreement, including, 
+# without limitation, that your use is for the sole purpose of 
+# programming logic devices manufactured by Altera and sold by Altera 
+# or its authorized distributors. Please refer to the applicable 
+# agreement for further details.
+
+# ACDS 20.1 720 linux 2023.10.21.04:56:13
+# ----------------------------------------
+# Auto-generated simulation script rivierapro_setup.tcl
+# ----------------------------------------
+# This script provides commands to simulate the following IP detected in
+# your Quartus project:
+#     ip_fp_mul
+# 
+# Altera recommends that you source this Quartus-generated IP simulation
+# script from your own customized top-level script, and avoid editing this
+# generated script.
+# 
+# To write a top-level script that compiles Altera simulation libraries and
+# the Quartus-generated IP in your project, along with your design and
+# testbench files, copy the text from the TOP-LEVEL TEMPLATE section below
+# into a new file, e.g. named "aldec.do", and modify the text as directed.
+# 
+# ----------------------------------------
+# # TOP-LEVEL TEMPLATE - BEGIN
+# #
+# # QSYS_SIMDIR is used in the Quartus-generated IP simulation script to
+# # construct paths to the files required to simulate the IP in your Quartus
+# # project. By default, the IP script assumes that you are launching the
+# # simulator from the IP script location. If launching from another
+# # location, set QSYS_SIMDIR to the output directory you specified when you
+# # generated the IP script, relative to the directory from which you launch
+# # the simulator.
+# #
+# set QSYS_SIMDIR <script generation output directory>
+# #
+# # Source the generated IP simulation script.
+# source $QSYS_SIMDIR/aldec/rivierapro_setup.tcl
+# #
+# # Set any compilation options you require (this is unusual).
+# set USER_DEFINED_COMPILE_OPTIONS <compilation options>
+# set USER_DEFINED_VHDL_COMPILE_OPTIONS <compilation options for VHDL>
+# set USER_DEFINED_VERILOG_COMPILE_OPTIONS <compilation options for Verilog>
+# #
+# # Call command to compile the Quartus EDA simulation library.
+# dev_com
+# #
+# # Call command to compile the Quartus-generated IP simulation files.
+# com
+# #
+# # Add commands to compile all design files and testbench files, including
+# # the top level. (These are all the files required for simulation other
+# # than the files compiled by the Quartus-generated IP simulation script)
+# #
+# vlog -sv2k5 <your compilation options> <design and testbench files>
+# #
+# # Set the top-level simulation or testbench module/entity name, which is
+# # used by the elab command to elaborate the top level.
+# #
+# set TOP_LEVEL_NAME <simulation top>
+# #
+# # Set any elaboration options you require.
+# set USER_DEFINED_ELAB_OPTIONS <elaboration options>
+# #
+# # Call command to elaborate your design and testbench.
+# elab
+# #
+# # Run the simulation.
+# run
+# #
+# # Report success to the shell.
+# exit -code 0
+# #
+# # TOP-LEVEL TEMPLATE - END
+# ----------------------------------------
+# 
+# IP SIMULATION SCRIPT
+# ----------------------------------------
+# If ip_fp_mul is one of several IP cores in your
+# Quartus project, you can generate a simulation script
+# suitable for inclusion in your top-level simulation
+# script by running the following command line:
+# 
+# ip-setup-simulation --quartus-project=<quartus project>
+# 
+# ip-setup-simulation will discover the Altera IP
+# within the Quartus project, and generate a unified
+# script which supports all the Altera IP within the design.
+# ----------------------------------------
+
+# ----------------------------------------
+# Initialize variables
+if ![info exists SYSTEM_INSTANCE_NAME] { 
+  set SYSTEM_INSTANCE_NAME ""
+} elseif { ![ string match "" $SYSTEM_INSTANCE_NAME ] } { 
+  set SYSTEM_INSTANCE_NAME "/$SYSTEM_INSTANCE_NAME"
+}
+
+if ![info exists TOP_LEVEL_NAME] { 
+  set TOP_LEVEL_NAME "ip_fp_mul"
+}
+
+if ![info exists QSYS_SIMDIR] { 
+  set QSYS_SIMDIR "./../"
+}
+
+if ![info exists QUARTUS_INSTALL_DIR] { 
+  set QUARTUS_INSTALL_DIR "/nix/store/q54w47mfmcj9ag8kxwqvyi0snainbhjw-quartus-prime-lite-unwrapped-20.1.1.720/quartus/"
+}
+
+if ![info exists USER_DEFINED_COMPILE_OPTIONS] { 
+  set USER_DEFINED_COMPILE_OPTIONS ""
+}
+if ![info exists USER_DEFINED_VHDL_COMPILE_OPTIONS] { 
+  set USER_DEFINED_VHDL_COMPILE_OPTIONS ""
+}
+if ![info exists USER_DEFINED_VERILOG_COMPILE_OPTIONS] { 
+  set USER_DEFINED_VERILOG_COMPILE_OPTIONS ""
+}
+if ![info exists USER_DEFINED_ELAB_OPTIONS] { 
+  set USER_DEFINED_ELAB_OPTIONS ""
+}
+
+# ----------------------------------------
+# Initialize simulation properties - DO NOT MODIFY!
+set ELAB_OPTIONS ""
+set SIM_OPTIONS ""
+if ![ string match "*-64 vsim*" [ vsim -version ] ] {
+} else {
+}
+
+set Aldec "Riviera"
+if { [ string match "*Active-HDL*" [ vsim -version ] ] } {
+  set Aldec "Active"
+}
+
+if { [ string match "Active" $Aldec ] } {
+  scripterconf -tcl
+  createdesign "$TOP_LEVEL_NAME"  "."
+  opendesign "$TOP_LEVEL_NAME"
+}
+
+# ----------------------------------------
+# Copy ROM/RAM files to simulation directory
+alias file_copy {
+  echo "\[exec\] file_copy"
+}
+
+# ----------------------------------------
+# Create compilation libraries
+proc ensure_lib { lib } { if ![file isdirectory $lib] { vlib $lib } }
+ensure_lib      ./libraries     
+ensure_lib      ./libraries/work
+vmap       work ./libraries/work
+ensure_lib                       ./libraries/altera_ver           
+vmap       altera_ver            ./libraries/altera_ver           
+ensure_lib                       ./libraries/lpm_ver              
+vmap       lpm_ver               ./libraries/lpm_ver              
+ensure_lib                       ./libraries/sgate_ver            
+vmap       sgate_ver             ./libraries/sgate_ver            
+ensure_lib                       ./libraries/altera_mf_ver        
+vmap       altera_mf_ver         ./libraries/altera_mf_ver        
+ensure_lib                       ./libraries/altera_lnsim_ver     
+vmap       altera_lnsim_ver      ./libraries/altera_lnsim_ver     
+ensure_lib                       ./libraries/cyclonev_ver         
+vmap       cyclonev_ver          ./libraries/cyclonev_ver         
+ensure_lib                       ./libraries/cyclonev_hssi_ver    
+vmap       cyclonev_hssi_ver     ./libraries/cyclonev_hssi_ver    
+ensure_lib                       ./libraries/cyclonev_pcie_hip_ver
+vmap       cyclonev_pcie_hip_ver ./libraries/cyclonev_pcie_hip_ver
+
+
+# ----------------------------------------
+# Compile device library files
+alias dev_com {
+  echo "\[exec\] dev_com"
+  eval vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_primitives.v"                    -work altera_ver           
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/220model.v"                             -work lpm_ver              
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/sgate.v"                                -work sgate_ver            
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_mf.v"                            -work altera_mf_ver        
+  vlog  $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS      "$QUARTUS_INSTALL_DIR/eda/sim_lib/altera_lnsim.sv"                        -work altera_lnsim_ver     
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/aldec/cyclonev_atoms_ncrypt.v"          -work cyclonev_ver         
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/aldec/cyclonev_hmi_atoms_ncrypt.v"      -work cyclonev_ver         
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_atoms.v"                       -work cyclonev_ver         
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/aldec/cyclonev_hssi_atoms_ncrypt.v"     -work cyclonev_hssi_ver    
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_hssi_atoms.v"                  -work cyclonev_hssi_ver    
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/aldec/cyclonev_pcie_hip_atoms_ncrypt.v" -work cyclonev_pcie_hip_ver
+  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QUARTUS_INSTALL_DIR/eda/sim_lib/cyclonev_pcie_hip_atoms.v"              -work cyclonev_pcie_hip_ver
+}
+
+# ----------------------------------------
+# Compile the design files in correct order
+alias com {
+  echo "\[exec\] com"
+  eval  vlog -v2k5 $USER_DEFINED_VERILOG_COMPILE_OPTIONS $USER_DEFINED_COMPILE_OPTIONS "$QSYS_SIMDIR/ip_fp_mul.vo"
+}
+
+# ----------------------------------------
+# Elaborate top level design
+alias elab {
+  echo "\[exec\] elab"
+  eval vsim +access +r -t ps $ELAB_OPTIONS -L work -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver $TOP_LEVEL_NAME
+}
+
+# ----------------------------------------
+# Elaborate the top level design with -dbg -O2 option
+alias elab_debug {
+  echo "\[exec\] elab_debug"
+  eval vsim -dbg -O2 +access +r -t ps $ELAB_OPTIONS -L work -L altera_ver -L lpm_ver -L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L cyclonev_ver -L cyclonev_hssi_ver -L cyclonev_pcie_hip_ver $TOP_LEVEL_NAME
+}
+
+# ----------------------------------------
+# Compile all the design files and elaborate the top level design
+alias ld "
+  dev_com
+  com
+  elab
+"
+
+# ----------------------------------------
+# Compile all the design files and elaborate the top level design with -dbg -O2
+alias ld_debug "
+  dev_com
+  com
+  elab_debug
+"
+
+# ----------------------------------------
+# Print out user commmand line aliases
+alias h {
+  echo "List Of Command Line Aliases"
+  echo
+  echo "file_copy                                         -- Copy ROM/RAM files to simulation directory"
+  echo
+  echo "dev_com                                           -- Compile device library files"
+  echo
+  echo "com                                               -- Compile the design files in correct order"
+  echo
+  echo "elab                                              -- Elaborate top level design"
+  echo
+  echo "elab_debug                                        -- Elaborate the top level design with -dbg -O2 option"
+  echo
+  echo "ld                                                -- Compile all the design files and elaborate the top level design"
+  echo
+  echo "ld_debug                                          -- Compile all the design files and elaborate the top level design with -dbg -O2"
+  echo
+  echo 
+  echo
+  echo "List Of Variables"
+  echo
+  echo "TOP_LEVEL_NAME                                    -- Top level module name."
+  echo "                                                     For most designs, this should be overridden"
+  echo "                                                     to enable the elab/elab_debug aliases."
+  echo
+  echo "SYSTEM_INSTANCE_NAME                              -- Instantiated system module name inside top level module."
+  echo
+  echo "QSYS_SIMDIR                                       -- Platform Designer base simulation directory."
+  echo
+  echo "QUARTUS_INSTALL_DIR                               -- Quartus installation directory."
+  echo
+  echo "USER_DEFINED_COMPILE_OPTIONS                      -- User-defined compile options, added to com/dev_com aliases."
+  echo
+  echo "USER_DEFINED_ELAB_OPTIONS                         -- User-defined elaboration options, added to elab/elab_debug aliases."
+  echo
+  echo "USER_DEFINED_VHDL_COMPILE_OPTIONS                 -- User-defined vhdl compile options, added to com/dev_com aliases."
+  echo
+  echo "USER_DEFINED_VERILOG_COMPILE_OPTIONS              -- User-defined verilog compile options, added to com/dev_com aliases."
+}
+file_copy
+h